AudioCodes Mediant 8000 - Table 40-14: Coder Parameters

Installation & Operation Manual 610 Document # LTRT-92224
Mediant 8000
Table 40-14: Coder Parameters
Parameter
Name
Type Provisioning
Type
Description
Name String
Up to 20 chars.
Online Easily identifiable user-defined Coder
name
Coder Name Enum
G.711 A-law, G.711 U-
law, G.729, G.723.1,
G.726, GSM-FR, GSM-
EFR, MS-GSM, NetCoder,
AMR, EVRC, Transparent,
QCELP, iLBC, EVRC-B
4GV, G.722, AMR-WB,
T.38, G.711A-law_VBD,
G.711U-law_VBD,
EG.711 A-law, EG.711 U-
law, G.729.1, MS RTA
NB, MS RTA WB
Online Defines Coder name.
Each Coder Name may appear in Coder
Table only once.
Packetization
Time
Enum
default, t10ms, t20ms,
t30ms, t40ms, t50ms,
t60ms, t70ms, t80ms,
t90ms, t100ms, t110ms,
t120ms, t130ms, t140ms,
t150ms
Online Defines packetization time (in
milliseconds).
Determines how many coder payloads
are combined into a single RTP packet.
If not specified, the ptime gets a default
value.
The ptime specifies the packetization
time the gateway expects to receive.
The gateway always uses the ptime
requested by the remote side for
sending RTP packets.
Coder
Rate(kbps)
Enum
0 – 64000
Online Defines coder bit rate (in Kbps).
Payload Type Integer
0-120
Online Defines payload type.
Applicable to coders with dynamic
payload only. Specifies the format of the
RTP payload. If not specified – a default
is used.
Silence
Suppression
Enum
Disable, Enable,
EnableWithoutAdaptations
Online Enables/disables the silence
suppression.
For G.729 it is also possible to select
the silence suppression without
adaptations.