AudioCodes Mediant 8000 - Table 39-5:Media Gateway Boards Coder Settings

Version 6.6 537 October 2014
Installation & Operation Manual 39. Configuring the Media Settings
Parameter Name Type Provisioning
Type
Description
NSE Payload Type Integer
96 – 127
Instant Defines Cisco’s NSE packets
payload type.
Table
39-5:Media Gateway Board's Coder Settings
Parameter Name Type Provisioning
Type
Description
Caller ID Transport Enum
Disable, Relay,
Reserve, Mute
Instant Defines the Caller ID detection
behavior:
 Disable – the caller ID signal is not
detected - DTMF digits remain in the
voice stream.
 Relay – currently not applicable.
 Mute – the caller ID signal is
detected from the Tel/PSTN side and
then erased from the voice stream.
Default Caller ID Enum
Bellcore(0),
ETSI(1),
NTT(2),
British(4), ETSI-
ETS(16),
Denmark(17),
Indian(18),
Brazilian(19)
Instant Defines the default Caller ID type.
Table 39-6: Media Gateway Board's NFS Server Settings
Parameter Name Type Provisioning
Type
Description
Default Coder String Online Defines default voice coder to be used
by the Media Gateway board. Typically
voice coder is negotiated via the call
control protocol, hence this setting has
low importance.
Default Packetization
Period
Integer
0 – 200
Instant Defines the default packetization period.