AudioCodes Mediant 8000 - Table 41-19: IP Profiles Parameters

Installation & Operation Manual 690 Document # LTRT-92224
Mediant 8000
Table 41-19: IP Profiles Parameters
Parameter
Name
Type Provisioning
Type
Description
Name String
Up to 20 chars.
Instant Textual, user-defined name
assigned to the IP Profile,
enabling users to identify it
intuitively and easily.
Preference Integer
-20
Instant Used to determine the priority of
the profile, where '20' is the
highest preference value. If both
IP and Tel profiles apply to the
same call, the coders and other
common parameters (noted by
an asterisk) of the preferred
Profile are applied to that call. If
the Preference of the Tel and IP
Profiles is identical, the Tel
Profile parameters are applied.
Coders
Group ID
Integer
1-5
Instant Used to assign different coders
to profiles. For each group, you
can define the first to fifth
preferred coders (and their
attributes) for the gateway. The
first coder is the highest priority
coder and is used by the
gateway whenever possible. If
the far end gateway cannot use
the coder assigned as the first
coder, the gateway attempts to
use the next coder and so forth.