EasyManua.ls Logo

AudioCodes Mediant 8000 - For Call Control and Signaling Interfaces (on TP Boards); IKE Protocol; IPSEC Protocol

AudioCodes Mediant 8000
924 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation & Operation Manual 340 Document # LTRT-92224
Mediant 8000
33.11.1.2 IPSEC Protocol
Transport or tunnel mode
Encapsulated Security Payload (ESP) only
Support for Cipher Block Chaining (CBC)
IPSEC SA encryption algorithms: DES, 3DES and AES (*)
IPSEC SA hash types: SHA1, SHA256 (*), SHA384 (*), SHA512 (*) and MD5
NAT Traversal (NAT-T) extension support (*)
Note: Features and algorithms marked with (*) are available on SC Rev.2 (Linux OS
based) boards only.
33.11.2 For Call Control and Signaling Interfaces (on TP boards)
This section describes the Call Control and Signaling Interfaces (on TP boards).
33.11.2.1 IKE Protocol
Authentication: pre-shared key or X.509 certificate
IKE SA encryption algorithms: DES, 3DES and AES
IKE SA hash types: SHA1 and MD5
Diffie-Helman groups: ModP768 and ModP1024
Dead-peer detection (as per RFC 3706)
33.11.2.2 IPSEC Protocol
Transport or tunnel mode
Encapsulated Security Payload (ESP) only
IPSEC SA encryption algorithms: DES, 3DES and AES
IPSEC SA hash types: SHA1 and MD5

Table of Contents

Related product manuals