Version 6.6 297 October 2014
Installation & Operation Manual 32. V5.2 Access Gateway
5. E1 Trunks that carry V5.2 Links must be configured as follows:
• Protocol Type = V5(43)
• V5.2 Number Of C-channels : for trunks that carry signaling V5.2 links, set
the value to 1; otherwise set the value to 0.
• V5 Protocol Side = LE(1)
32.1.2.3 Configuring V5.2 Interfaces
When configuring V5.2 interfaces, for each new V5.2 Interface, configure Interface ID
and Variant ID parameters to match the remote PSTN side.
To configure V5.2 Interfaces:
1. Click
to access the Media Gateway status screen.
2. Select the desired TP-8410 Media Gateway board.
3. In the Navigation pane, select PSTN
V5.2 V5.2 Interfaces and in the
Configuration pane, click V5.2 Interfaces; the V5.2 Interfaces list is displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and in the Configuration pane, click V5.2 Interface
Settings; the V5.2 Interface Settings screen is displayed.
6. Configure V5.2 Interface parameters as described in the table 'V5.2 Interface
Properties' below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
Table 32-1: V5.2 Interface Properties
Parameter Name
Type
Provisioning
Type
Description
V5.2 Interface
Name
String
Up to 200
chars.
Instant User-defined name (textual) for the V5.2
Interface, enabling users to identify it
intuitively and easily.
Interface ID Integer
0-16777215
Online Defines the V5.2 Interface ID towards the
peer entity.
Variant ID Integer
0-127
Online Identifies a set of configuration parameters.
Logical C-
Channel ID
Integer
0-65535
Online Identifies a set of signaling c-paths.
Trace Level Integer
0,20-23
Instant The trace-level indication for the V5.2
protocol.
To Next Page
Loading...
