AudioCodes Mediant 8000 - Converting the Call Progress Tones File to Binary Format; Figure 37-1: Call Progress Tones Screen

Version 6.6 429 October 2014
Installation & Operation Manual 37. Using Auxiliary Files
37.2.2 Converting the Call Progress Tones File to Binary Format
After editing the "source" Call Progress Tones file, you must convert it to the binary
format using the DConvert utility provided on the Media Gateway Software
Installation CD.
 To convert a "source" CPT file to a binary format:
1. Execute DConvert.exe and click the Process Call Progress Tones file(s)
button; the Call Progress Tones dialog is displayed.
Figure
37-1: Call Progress Tones Screen
2. Click the Select File . button and navigate to the location of the "source" CPT ini
file that you want to convert.
3. Select the desired file and click Open. The name and path of both the CPT ini file
and the dat file appear in the Using File field and Output File field respectively.
(The file names and paths are identical except for the file extension.)
4. Fill in the Vendor, Version and Version Description fields.
• Vendor field - 256 characters maximum
• Version field - must be made up an integer, followed by a period '.', then
followed by another integer (e.g., 1.2, 23.4, 5.22)
• Description field - 256 characters maximum
5. The default value of the CPT version drop-down list is Version 3 – leave it
unchanged.
6. Click a checkmark in Use dBm units for tone levels checkbox to use -dBm units
for setting the Call Progress Tone and User Defined Tone Levels.
7. Click the Make File button. The binary dat file is generated and placed in the
same directory as shown in the Output File field. A message box informing you
that the operation was successful indicates that the process is completed.