Installation & Operation Manual 784 Document # LTRT-92224
Mediant 8000
4. Click Yes to continue; the Backup File select prompt is displayed.
Figure 44-4: Select Backup File
Choose whether you wish to restore the backup file that is currently stored on the
EMS server, or a file stored in some other location (e.g. on the EMS client PC or
on a file server).
5. Choose the backup file and click OK.
6. Wait patiently while the Media Gateway software is restored from the backup.
When performing the restore operation via the EMS GUI, the backup is restored
on both SC boards automatically. The restore operation may take up to 20
minutes, depending on the Backup Type and amount of configuration data.
To Next Page
Loading...
