Version 6.6 785 October 2014
Installation & Operation Manual 44. Media Gateway Software Backup/Restore Procedures
To restore the Media Gateway software from the backup file via the CLI:
1. Transfer the backup file from safekeeping location to both SC boards via the
SFTP/SCP/FTP protocol. Use a regular CLI user name and password when
prompted (e.g. acladmin). See 'transferring the Mediant 8000 Installation
Package to the SC Boards' on page 130 for details on how to perform a file
transfer.
Transferring the Backup file to the SC board via the Command-line SFTP client
Microsoft Windows XP [Version 5.1.2600]
© Copyright 1985-2001 Microsoft Corp.
C:\> psftp acladmin@10.7.13.91
Using username "acladmin"
+-----------------------------------------------------------+
| WARNING: To protect systems from unauthorized use and to | | ensure
that the system is functioning properly, |
| activities on this system are monitored and recorded and |
| subject to audit. Use of this system is expressed consent |
| to such monitoring and recording. Any unauthorized access |
| or use of this system is prohibited and could be subject |
| to criminal and civil penalties. |
+-----------------------------------------------------------+
Password: ******
Remote working directory is /data/acladmin
psftp> lcd \Backup
New local directory is c:\Backup
psftp> put backup_12jan2009.bk
local: backup_12jan2009.bk => remote:/data/acladmin/backup_12jan2009.bk
psftp> bye
2. Connect to the CLI interface on both SC boards . For more information, see
Section 'Connecting to the CLI via the IP Network' on page 111.
3. Login as the root user. For more information, see Section 'Logging in as a Root
User' on page 115.To stop the Media Gateway software on both SC boards, at
the prompt, type tools sc dn and press Enter. When prompted to confirm this
command, type y and press Enter.
client238::~# tools sc dn
STOP SC SOFTWARE
Stop SC software? ([y]/n) : y
>>> Stop watchdog process...
>>> Wait for application to stop...
To Next Page
Loading...
