AudioCodes Mediant 8000 - Table 49-2: CDR Report Level

Version 6.6 853 October 2014
Installation & Operation Manual 49. Collecting Advanced Media Gateway Board Logs
Table 49-2: CDR Report Level
Parameter
Name
Type
Provisioning
Type
Description
CDR Report
Level
Enum
None, EndCall,
StartAndEndCall,
ConnectAndEndC
all,
StartAndEndConn
ectAndCall
Instant Determines whether CDRs are sent to
the Syslog server. When enabled,
indicates upon events they are sent.
Valid options include:
 0 = Call Detail Record (CDR) is not
used (default).
 1 = CDR is sent to the Syslog server
at the end of each call.
 2 = CDR report is sent to Syslog at
the start and end of each call.
 3 = CDR report is sent to Syslog at
connection and at the end of each
call.
 4 = Start and Connect and End Call =
CDR report is sent to Syslog at the
start, at connection, and at the end of
each call.