Version 6.6 55 October 2014
Installation & Operation Manual 10. TP-8410 Media Gateway Board
LED Label Description Color
Board Power is down Off
SWAP READY Normal Operation Off
Board is ready to be extracted
from the chassis (latch is open)
Blue
10.1 LED Array Display
The LED Array display indicates the trunk numbers currently represented by the TP-
8410 board's PSTN LEDs (labeled E1/T1). The status of the E1/T1 trunks is indicated
by the eight E1/T1 LEDs in groups of eight trunks. Each time you press the LED Array
Display button (located to the left of the LED display) the status of the next eight
consecutive trunks is indicated by the E1/T1 LEDs. For example, when you first press
the LED Array Push button, the first group of trunks indicated by the LEDs is 1-8. The
next time you press the LED Array Push button, the next group of trunks indicated by
the LEDs is 9-16. You can continue this process until reaching trunk 42.
The LED Array display also displays the TP-8410 board’s MAC address. Press the
LED Array Display button until the last group of trunks is displayed, and then press
again to display the MAC address.(When the MAC address is displayed, the E1/T1
LEDs turn off.) The next press of the button displays the first trunk group.
To Next Page
Loading...
