AudioCodes Mediant 8000 - Configuring the Redirect Number Manipulation IP to Tel Routing

Installation & Operation Manual 662 Document # LTRT-92224
Mediant 8000
Parameter Name Type
Provisioning
Type
Description
Leave from Right Integer
0-255
Instant Number of Digits to Leave
Prefix2Add String
Up to 101 chars.
Instant Prefix to Add
Suffix2Add String
Up to 101 chars.
Instant Suffix to Add
41.5.4 Configuring the Redirect Number Manipulation IP to Tel
Routing
This section describes how to configure the redirect number manipulation IP to Tel
routing.
 To configure Redirect Number Manipulation IP to Tel Tables:
1. Click
to access the Media Gateway status screen.
2. Select the desired SIP board.
3. In the Navigation pane, select SIP
Gateway/IP to IP Manipulation Redirect
Number Manipulation IP to Tel; the Redirect Number Manipulation IP to Tel list
screen is displayed.
4. Use the
or buttons to add or remove entries correspondingly
5. Select a specific row in the Redirect Number Manipulation IP to Tel table and in
the Configuration pane, click the corresponding link; the corresponding Redirect
Number Manipulation IP to Tel Settings screen is displayed.
6. Configure the Redirect Number Manipulation IP to Tel Table entry parameters
according to the table Redirect Number Manipulation IP to Tel table parameters'
below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
Table
41-7: Redirect Number Manipulation IP to Tel Table Parameter
Parameter
Name
Type Provisioning
Type
Description
Destination
Prefix
String
Up to 101 chars.
Instant Destination Prefix
Redirect Prefix String
Up to 101 chars.
Instant Redirect Prefix