AudioCodes Mediant 8000 - Real-Time Performance Measurements; Figure 34-4: Select Screen

Version 6.6 405 October 2014
Installation & Operation Manual 34. Performance Measurements
34.6 Real-Time Performance Measurements
Real-Time PMs provide high-frequency polling of various system parameters, such as
CPU utilization or Trunk usage.
 To view Real-Time Performance Measurements:
1. Click
to access the Media Gateway status screen.
2. Select the relevant Media Gateway entity for which you wish to display Real Time
PMs. For example, select the Media Gateway board, then in the Toolbar, click
Performance.
3. In the Performance pane, select Real Time PM.
4. The "Select Screen" window is displayed.
Figure
34-4: Select Screen
Select the screen where you wish to display new data. If you choose a new
screen, enter the custom screen name.