AudioCodes Mediant 8000 - Table 43-3: SBC Classification Parameters Operation Rules

Version 6.6 743 October 2014
Installation & Operation Manual 43. Session Border Controller (SBC) Application
Parameter Name Type
Provisioning
Type
Description
Message
Condition
Integer
0-20
Instant Defines the index of the condition to which
to associate.
The classification is used only if the
classification rule and its associated
condition rule are matched.
Source Port Integer
0-65534
Instant Defines the Source Port of the incoming
SIP message.
Source Transport
Type
Enum
Udp,
Tcp,
Tls
Instant Defines the Source Transport Type of the
incoming SIP message.
Action Type Enum
Deny,
Allow
Instant Defines SIP application-layer access lists.
It offers greater flexibility in the security
mechanism of the SBC by allowing the
user to configure whitelists (allowed
messages) and blacklists (deny
messages) based on classification rules.
If the incoming SIP dialog cannot be
classified according to the classification
table, the call is accepted or rejected
based on the settings of the existing
parameter "SBC Unclassified Calls".
Table 43-3: SBC Classification Parameters “Operation Rules”
Parameter
Name
Type
Provisioning
Type
Description
Source IP
Group
Integer
0-32
Instant Defines the index of the IP Group to be
associated with the call as a result of
classification process and is used for
SBC routing and manipulations.
The IP Group must be associated with
the Source SRD.