AudioCodes Mediant 8000 - Configuring the Time Band Table

Installation & Operation Manual 636 Document # LTRT-92224
Mediant 8000
40.13.3 Configuring the Time Band Table
The purpose of Time Band table is to configure Time Bands for Cost Group. The time
bands defines the day and time range for which the time band is applicable (e.g. from
Monday 05:00 to Friday 16:00) as well as the fixed call connection charge and call
rate per minute for this interval.
 To configure the Time Band Table:
1. Click
to access the Media Gateway status screen.
2. Select the desired SIP board.
3. In the Navigation Pane, select SIP SIP General
Least Cost Routing Cost
Group
Time Band; the Time Band list is displayed.
4. Use the
or buttons to add or remove entries. Note – only one can be
added.
5. Select a specific row and in the Configuration pane, click SIP Cost Group Group
Time Band Frame; the SIP Cost Group screen is displayed.
6. Configure Time Band parameters according to the table Time Band Parameters'
below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
Time Band Parameters
Parameter
Name
Type
Provisioning
Type
Description
Start Time
(ddd:hh:mm)
String
up to 9 chars
Instant Defines The Day And Time Of Day From
When This Time Band Is Applicable.
The Format Is Ddd:hh:mm (e.g.,
Sun:06:00), Where: Ddd Is The Day (i.e.,
Sun, Mon, Tue, Wed, Thu, Fri, Or Sat)
Hh And Mm Denote The Time Of Day,
Where Hh Is The Hour (00-23) And Mm
The Minutes (00-59)
End Time
(ddd:hh:mm)
String
Up To 9 Chars
Instant Defines The Day And Time Of Day Until
When This Time Band Is Applicable.
The Format Is Ddd:hh:mm (e.g.,
Sun:06:00), Where: Ddd Is The Day (i.e.,
Sun, Mon, Tue, Wed, Thu, Fri, Or Sat)
Hh And Mm Denote The Time Of Day,
Where Hh Is The Hour (00-23) And Mm
The Minutes (00-59)
Connection
Cost
Integer
0-65533
Instant Defines The Call Connection Cost During
This Time Band. This Is Added As A Fixed
Charge To The Call.