Version 6.6 347 October 2014
Installation & Operation Manual 33. Configuring Security Settings
Table 33-10: TP IPSEC Rules Parameters (TP Boards)
Parameter Name Type
Provisioning
Type
Description
Name String
Up to 80 chars
Instant Textual name for the IPSEC Rule, enabling
to identify it easily.
Operation Mode Enum
Transport,
Tunnel
Online Defines IPSEC operation mode.
Remote IP
Address
String
Up to 30 chars
Online Defines the remote IP address of the
IPSEC SA. Applicable for Transport mode
only.
Remote Tunnel
IP Address
String
Up to 30 chars
Online Defines the IP address of the remote
IPSEC tunneling device. Applicable for
Tunnel mode only.
Remote Subnet
IP Address
String
Up to 30 chars
Online Defines the IP address of the remote
subnet (behind the IPSEC tunneling
device). Applicable for Tunnel mode only.
Remote Subnet
Prefix Length
Integer
0 – 128
Online Defines the prefix length of the Remote
Subnet IP Address. Applicable for Tunnel
mode only.
Local Port Integer
0 – 65535
Online Defines the local port of the IPSEC SA.
Value 0 means 'any'.
Remote Port Integer
0 – 65535
Online Defines the remote port of the IPSEC SA.
Value 0 means 'any'.
Protocol Integer
0 – 255
Online Defines the IP protocol of the IPSEC SA.
Value 0 means 'any'. Commonly used
values: 6 = TCP, 17 = UDP
Authentication
Mode
Enum
Preshared Key,
Certificate
Online Defines authentication mode.
Preshared Key String
Up to 100
chars
Online Defines the Pre-Shared Key in ASCII
format. Applicable for Preshared Key
authentication mode only. Once
provisioned, the value is hidden from user
via asterisks (*****) for security reasons.
IKE Lifetime
(sec)
Integer
0 –
2147483647
Online Defines the IKE SA Lifetime (in seconds).
IPSEC Lifetime
(sec)
Integer
0 –
2147483647
Online Defines the IPSEC SA Lifetime (in
seconds).
To Next Page
Loading...
