Installation & Operation Manual 214 Document # LTRT-92224
Mediant 8000
26.6.1 Activating New Network Interfaces Configuration
The new IP network configuration is activated by unlocking all relevant entities (e.g.
Media Gateway, Media Gateway boards) etc. To simplify the network configuration, all
"intermediate" configuration objects (e.g. Subnet and Network Profiles) do not
require an explicit unlock – instead, they are automatically unlocked when the
corresponding Media Gateway board is unlocked.
26.6.1.1 Offline Network Configuration of ES/6600
Configuration of network interfaces separation and VLAN tags must be performed
when the Media Gateway is locked. It is not applied immediately –only when lock and
unlock maintenance actions are performed on both Ethernet Switch (ES) boards.
Users who modify the affected configuration will be forced to perform lock/unlock of
the ES boards prior to unlocking the Media Gateway (EMS and CLI management
interfaces will produce a corresponding warning when the user attempts to unlock the
Media Gateway).
The ES board is reset as part of the unlock action and it may take up to 10 minutes till
it completes the reset and returns to service. Lock/unlock actions must be performed
on ES boards sequentially (one at a time) in the following order:
Lock the ES boards in both Slots 9 and 19
Unlock the ES board in Slot 9 and wait until it completes the restart and returns to
service.
Unlock the ES board in Slot 19 and wait until it completes the restart and returns
to service.
See 'Activating Offline Network Configuration' on page 216 for details.
To Next Page
Loading...
