AudioCodes Mediant 8000 - Status Leds; Table 12-3: SC Rev.2 Board (Linux OS) LED Indicators

Installation & Operation Manual 68 Document # LTRT-92224
Mediant 8000
12.2.4 Status LEDs
The SC Rev.2 board has LED indicators on its front panel that are used to indicate the
status of the board.
Table
12-3: SC Rev.2 Board (Linux OS) LED Indicators
Label Function Color
FAIL Normal operation Off
Board failure Red
ACT Currently not in use Off
ETH Ethernet link status.
Only the first two LEDs are in use.
Normal operation (1Gbps mode) Green
Normal operation (100 Mbps mode) Orange
Link disconnected Off
Storage Activity Blinks during normal operation when the
SC software accesses the storage device
(SSD).
Green
RS-232 ACT Front serial console port is in use Green
Rear serial console port (on SA/RTM
board) is in use
Off
PWR Power is received (normal operation) Green
Power is not supplied to the board Off
SWAP READY Normal operation Off
Board is ready for extraction from the
chassis (latches are open).
Blue