Installation & Operation Manual 792 Document # LTRT-92224
Mediant 8000
45.1.3 Emtpy Slots Cover Requirements
It is imperative to cover all unoccupied slots in both the front cage and the rear cage of
the Mediant 8000 chassis with blank panels to maintain the mandatory high, internal
airflow and to ensure continuous compliance with EMC standards.
Note: The front blank panels are baffled panels. Be sure to use this type of blank
panel in the front of the chassis and use the blank panel without the baffle in the
rear of the chassis only.
Figure
45-1: Baffled Blank Panel for Front Slots
Figure
45-2: Blank Panel for Rear Slots
To Next Page
Loading...
