AudioCodes Mediant 8000 - SBC Condition Table

Installation & Operation Manual 744 Document # LTRT-92224
Mediant 8000
43.10 SBC Condition Table
The SBC Condition table is used as part of the generic classification process.
This classification is used only if the classification rule and its associated condition rule
are matched.
 To configure the SBC Condition:
1. Click the
button to access the Media Gateway status screen.
2. Select the SIP board.
3. In the Navigation Pane, select SIP
SBC SBC Condition; the SBC Condition
s list is displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and in the Condition pane, click SBC Condition Settings;
the SBC Condition Settings screen is displayed.
6. Configure SBC Condition parameters according to the table 'SBC Condition
Parameters' below.
7. Click the Maintenance icon and select Unlock to activate the configuration.
Table 43-4: SBC Condition Parameter
Parameter
Name
Type
Provisioning
Type
Description
Condition String
Up to 299 chars
Instant The defined condition.
For example : "header.from.url.user ==
'1000' AND header.from.url.user ==
'8000'".
Description String
Up to 60 chars
Instant Description of the condition