Version 6.6 535 October 2014
Installation & Operation Manual 39. Configuring the Media Settings
Parameter Name Type
Provisioning
Type
Description
TTY Transport Type Enum
Disable(0),
Bypass(1),
Inband
Relay(2)
Instant Defines the transferring method of TTY
signals during a call.
TTY/Fax/Modem
Bypass Coder Type
Enum
G711 Alaw,
G711 Mulaw,
G726-32,
G726-40
Instant Defines the TTY/fax/modem bypass
coder type.
Fax Bypass Payload
Type
Integer
0 – 127
Instant Defines the fax bypass payload type.
Fax Relay
Redundancy Depth
Integer
0 – 2
Instant Defines the number of times that each
T.38 fax relay payload is retransmitted to
the network.
T38 Redundancy
Depth
Enum
No
Redundancy,
One Packet,
Two Packets,
Three Packets,
Max
Instant Defines the number of repetitions to be
applied to control packets when using the
T.38 protocol.
Fax Relay ECM Enum
Disable,
Enable
Instant Defines whether the Error Correction
Mode (ECM) mode is used during fax
relay.
Table
39-4:Media Gateway Board's Caller ID Settings
Parameter Name Type Provisioning
Type
Description
V34 Fax Transport
Method
Enum
Transparent,
Relay, Bypass,
Transparent
With Events
Instant Defines the V.34 fax transport
method.