Version 6.6 315 October 2014
Installation & Operation Manual 33. Configuring Security Settings
• SC board must be rebooted to complete *
• the OS patches installation !!! *
Reboot now? (y/n) [y]: y
10. The SC board reboots. It typically takes 2 minutes to complete the reboot. The
Media Gateway software starts automatically after the SC board completes the
reboot.
11. Perform SC activity switchover as described in 'Working with the SC Boards' on
page 223.
12. Repeat steps 2-9 on the SC board that currently operates as Standby (initially
operated as Active).
13. Perform SC activity switchover as described in 'Working with the SC Boards' on
page 223 to restore the initial Mediant 8000 software configuration.
33.7.2 Installing the Latest OS Security Patches from the “OS
Security Patch Bundle”
The “OS security patch bundle” is a special installation package that contains only the
latest OS security patches (without the core Mediant 8000 software) and is provided
on customer request.
Installation of the latest OS security patches from the “OS security patch bundle” is
very similar to the procedure described in Installing OS Security Patches from a Latest
Version Installation Package’ above.
To install the latest OS Security Patches from the “OS Security Patch
Bundle”:
1. Complete steps 1-5 as described in the above procedure.
2. In step 6, at the prompt, specify install ~acladmin/tg_
os_patch_22_Apr_09.install and press Enter. Replace acladmin with the name
of the CLI user, that you used while transferring the “OS security patch bundle” to
the SC board. Replace tg_os_patch_22_Apr_09.install with the name of the
“OS security patch bundle”.
client241::~# install ~acladmin/tg_os_patch_22_Apr_09.install
3. Complete steps 7-12 as described in the above procedure.
To Next Page
Loading...
