Installation & Operation Manual 626 Document # LTRT-92224
Mediant 8000
Parameter Name Type
Provisioning
Type
Description
Domain Name String
Up to 31 chars.
Instant If the internal DNS table is configured, the
gateway first tries to resolve a domain
name using this table. If the domain name
isn't found, the gateway performs a DNS
resolution using an external DNS server.
First / Second /
Third / Fourth IP
Address
IP Address Instant Up to four IP address assigned to a
hostname.
Also supports IPV6.
40.9 SIP SRV to IP Table
The Internal SRV table provides a table for resolving host names to DNS A-
Records.Three different A-Records can be assigned to each host name. Each A-
Record contains the host name, priority, weight, and port.
If the Internal SRV table is configured, the Mediant 8000 initially attempts to resolve a
domain name using this table. If the domain name isn't found, the Service Record
(SRV) resolution is performed using an external DNS server.
40.9.1 Configuring the SIP SRV to IP Table
This section describes how to configure the SIP SRV to IP table.
To configure the Internal SRV Table:
1. Click
to access the Media Gateway status screen.
2. Double-click the desired SIP board.
3. In the Navigation pane, select SIP
SIP General SRV; the SIP SRV to IP list
is displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and then in the configuration pane, click SIP SRV to IP
Settings; the SIP SRV to IP Settings provisioning screen is displayed.
6. Configure the SIP SRV to IP Table entry parameters as described in the table
'SIP SRV to IP Table Parameters' below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
To Next Page
Loading...
