Installation & Operation Manual 440 Document # LTRT-92224
Mediant 8000
digits).
• NUM_OF_EVENT_IN_STATE - Inserted for detection on
TOTAL_NUMBER_OF_EVENTS_IN_STATE (CASSetup.h).
• INIT_MGCP_REPORT - Enables the event for MGCP. These tables are
specifics and relevant for MGCP only. Do not use it otherwise.
• INIT_GLOBAL_TIMERS - Initiates specific timers, is used with Parameter#1
for metering pulse timer duration.
• INIT_VERSION - Defines the version number. The version number is related
to the release version number.
• INIT_SIZE_OF_TABLE_PARAM - Users must insert the definition of
TOTAL_NUMBER_OF_EVENTS_IN_STATE from the CASSetup.h.
ST_IDLE - When no active call is established or in the process of being
established, the table resides in Idle state, allowing it to start the process of
incoming or outgoing calls. When the call is cleared, the state machine table
returns to its idle state.
37.5.1.5 Reserved Words
For reserved words, such as DO, NO_STATE, refer to the CASSetup.h file.
37.5.1.6 State's Line Structure
Each text line in the body of each state is composed of six columns:
Action/Event
Function
Parameter #1
Parameter #2
Parameter #3
Next State
37.5.1.6.1 Action/Event
Action/Event is the name of the table's events that are the possible triggers for the
entire protocol state machine. They can be selected from the list of events in the
CASSetup.h file (e.g., EV_DISCONNECT_INCOMING).
At the beginning of the state, there can be up to four special unconditional
Action/Events called FUNCTION. These events are functions that are unconditionally
performed when the table reaches the state. These actions are labeled FUNCTION0
to FUNCTION3.
The following is the list of available protocols table actions (events to the state
machine):
User Command Oriented:
• EV_PLACE_CALL - When initiating a new outgoing call
• EV_ANSWER - When answering an incoming call
• EV_DISCONNECT_OUTGOING - When disconnecting outgoing call.
• EV_DISCONNECT_INCOMING - When disconnecting incoming call.
To Next Page
Loading...
