Version 6.6 99 October 2014
Installation & Operation Manual 16. Hardware Installation
16 Hardware Installation
Take the following steps to install the Mediant 8000 hardware on the site:
Unpack the Mediant 8000 package and verify its content
Mount the Mediant 8000 chassis on a rack
Earth the Mediant 8000 (connect earthing contacts to the ground)
Connect the Mediant 8000 to power sources and power it up
16.1 Unpacking/Checking Contents
The Mediant 8000 (configured and populated as per the customer’s order) is shipped
in a heavy-duty wooden crate. Two technicians are required to lift the chassis from its
wooden crate.
Note : Detailed instuctions for unpacking the chassis are provided in the document
"UnPacking Instructions" which is attached to the side of the chassis's wooden
crate along with the Packaging List.
To Next Page
Loading...
