AudioCodes Mediant 8000 - Table 43-9: SBC IP to IP Inbound Manipulation Table Matching Rules

Installation & Operation Manual 756 Document # LTRT-92224
Mediant 8000
Table 43-9: SBC IP to IP Inbound Manipulation Table "Matching Rules"
Parameter Name Type
Provisioning
Type
Description
Source
Username Prefix
String
Up to 20 chars
Instant Defines the prefix of the user part of the
incoming SIP request's source URI
(usually the From header).
To denote any source username prefix
leave the field empty or use asterisk (*)
symbol.
Source Host String
Up to 50 chars
Instant Defines the hostname of the incoming SIP
request's source URI (usually the From
header).
To denote any source host leave the field
empty or use asterisk (*) symbol.
Destination
Username Prefix
String
Up to 50 chars
Instant Defines the prefix of the user part of the
incoming SIP request's destination URI
(usually the Request URI).
To denote any destination username prefix
leave the field empty or use asterisk (*)
symbol.
Destination Host String
Up to 50 chars
Instant Defines the hostname of the incoming SIP
request's destination URI (usually the
Request URI) user part.
To denote any destination host leave the
field empty or use asterisk (*) symbol.
Additional
Manipulation
Enum
No, Yes
Instant Defines whether additional SIP URI user
part manipulation is performed for the table
entry rule listed directly above it.
No – Regular manipulation rule (not
performed in addition to the rule above it).
Yes – If the previous table row entry rule
matched the call, consider this row entry
as a match as well and perform the
manipulation specified by this rule.
Note: Additional manipulation can only be
performed on a different SIP URI (either
source or destination) to the rule
configured in the row above (defined by
the parameter ManipulatedURI).
Manipulated URI Enum
Source,
Destination
Instant Defines whether the source or destination
SIP URI user part is manipulated.
Source IP Group Integer Instant Defines the IP Group from where the call