Version 6.6 911 October 2014
Installation & Operation Manual D. Appendix - List of Notification Traps
D Appendix - List of Notification Traps
The Media Gateway supports the generation of the following notification traps (alarms
and events):
1. Board Failure Trap - failure of the specific board
2. Admin State Change - change of administrative state of specific entity
3. Operative State Change - change of operative state of specific entity
4. Trunk Alarm - trunk state change alarm
5. Configuration Error - configuration error
6. Operational Info - operational information
7. Voltage Alarm - voltage alarm
8. Fan Alarm - fan alarm
9. Temperature Alarm - temperature alarm
10. Ethernet External Link Alarm - ethernet external link alarm
11. Ethernet Internal Link Alarm - ethernet internal link alarm
12. Power Supply Alarm - power supply alarm
13. Push Button Alarm - push button alarm
14. Board Temperature Alarm - Media Gateway board temperature alarm
15. STM 1 Link Alarm - STM 1 link alarm
16. Board Diagnostics Alarm - board diagnostics alarmBoard Diagnostics Alarm -
board diagnostics alarm
17. NTP Server Status Changed - NTP server status changed
18. GW Switchover Alarm - GW switchover alarm
19. Configuration Change - configuration change
20. SS7 Activity State Change - change of activity state of SS7 link or linkset
21. SS7 Local Inhibit State Change - change of local inhibit state of SS7 link
22. SS7 Remote Inhibit State Change - change of remote inhibit state of SS7 link
23. SS7 Congestion State Change - change of congestion state of SS7 link
24. Active Alarm Overflow Trap - overflow of Active Alarms table
25. Security Alarm – security alarm
26. Power Entry Module Alarm – alarm on the Power Entry Module (PEM)
27. Clock Synchronization Alarm – change in state of the PSTN clock
synchronization
28. External Reference Clock Alarm – alarm on the external PSTN clock reference
29. Timing Module Alignment Alarm – change in the Media Gateway board’s
alignment to the Timing Module
30. Board Restart Alarm – indicates that specific Media Gateway board is being
currently restarted
31. Hardware Error Alarm – hardware error alarm
32. High Availability Alarm – change in the HA status
33. Security Event – security event
34. Line Sync Reference Clock Alarm – alarm on the reference PSTN clock in Line
Sync mode
To Next Page
Loading...
