AudioCodes Mediant 8000 - SAS Registration Manipulation

Version 6.6 723 October 2014
Installation & Operation Manual 42. Stand-Alone Survivability (SAS) Application
42.3 SAS Registration Manipulation
This table is used by the SAS application to manipulate the SIP Request-URI user part
of incoming INVITE messages and of incoming REGISTER request AoR (To header),
before saving it to the registered users database. Currently, the SAS Registration
Manipulation table holds one index entry (1 row only).
 To configure the SAS Registration Manipulation Table:
1. Click the
button to access the Media Gateway status screen.
2. Select the SIP board.
3. In the Navigation pane, select SIP
SAS.
4. In the Toolbar, click SAS Registration Manipulation; the SAS Registration
Manipulation List screen is displayed.
5. Use the
or buttons to add or remove entries.
6. Select a specific row and in the Configuration pane, click SIP SAS Registration
Manipulation; the SIP SAS Registration Manipulation screen is displayed.
7. Configure the SIP SAS Registration Manipulation parameters according to the
table ' SIP SAS Registration Manipulation below.
8. Click the Maintenance icon
and select Unlock to activate the configuration.
SIP SAS Registration Manipulation Table
Parameter
Name
Type
Provisioning
Type
Description
Remove From
Right
Integer
0 - 30
Online Number of digits removed from the right
side of the user part before saving to the
registered user database.
Leave From
Right
Integer
0 - 30
Instant Number of digits to keep from the right
side.