AudioCodes Mediant 8000 User Manual

Installation & Operation Manual 534 Document # LTRT-92224
Mediant 8000
Parameter Name Type Provisioning
Type
Description
Standard SID Payload
Type
Enum
Disable, Enable
Instant Defines whether Silence
Indicator (SID) packets are sent
according to RFC 3389.
 Disable – G.711 SID packets
are sent in a proprietary
method.
 Enable – SID (comfort noise)
packets are sent with the RTP
SID payload type according to
RFC 3389. Applicable to
G.711 and G.726 coders.
Media UDP Checksum Enum
Disable, Enable
Online Defines whether the Media
Gateway inserts a non-zero UDP
layer checksum on outgoing
packets for UDP streams
carrying media content (audio
and video).
RTP Payload Format Enum
RTP, ATM
Instant Defines the voice payload format.
Table 39-3: Media Gateway Board's Fax/Modem Settings
Parameter Name Type
Provisioning
Type
Description
Enable Fax Modem
Inband Network
Detection
Enum
Disabled,
Enabled
Instant Enables or disables in-band network
detection related to fax/modem. When
this parameter is enabled on Bypass
mode, a detection of an Answer Tone
from the network triggers a switch to
bypass mode in addition to the local
Fax/Modem tone detections. However,
only a high bit-rate coder voice session
effectively detects the Answer Tone sent
by a remote Endpoint. This can be useful
when, for example, the payload of voice
and bypass is the same, allowing the
originator to switch to bypass mode as
well.
General Fax Transport
Method
Enum
Transparent,
Relay, Bypass,
Transparent
Instant Defines the fax transport method.

AudioCodes Mediant 8000 Specifications

General

Brand	AudioCodes
Model	Mediant 8000
Category	Gateway
Language	English