Version 6.6 533 October 2014
Installation & Operation Manual 39. Configuring the Media Settings
Parameter Name Type Provisioning
Type
Description
Default RTCP-XR Enum
Disable, EnableFull,
CalculationOnly
Online Enables voice quality monitoring
and RTCP XR reports.
Disable – RTCP-XR reports
are disabled
Calculation Only – RTCP-XR
statistics are calculated and
events are sent to the
application; however, RTCP-
XR reports are not sent to the
network
EnableFull – RTCP-XR
reports are enabled.
RTCP Randomize Enum
Randomize,
NotRandomize
Online Defines whether RTCP report
intervals are randomized or
whether each report interval
accords exactly to the parameter
defining RTCP Mean Tx Interval
(in milliseconds).
VQM Burst Threshold Integer
-1 – 12
Online Defines excessive burst alert
threshold for Voice Quality
Monitoring (VQM). If set to -1, no
alerts are issued.
VQM Delay Threshold Integer
-1 – 12
Online Defines excessive delay alert
threshold for Voice Quality
Monitoring (VQM). If set to -1, no
alerts are issued.
VQM EOC Received
Delay Threshold
Integer
-1 – 12
Online Defines end of call low quality
alert threshold for Voice Quality
Monitoring (VQM). If set to -1, no
alerts are issued
Minimum Gap Size Integer
0 – 255
Instant Voice quality monitoring -
minimum gap size (number of
frames).
RTCP Activation Mode Enum
ActiveAlways,
InactiveOnlyIfRTPIna
ctive
Instant Disables RTCP traffic when there
is no RTP traffic.
Active Always (default) =
RTCP is active even during
inactive RTP periods.
Inactive Only If RTP Inactive
= No RTCP is sent when RTP
is inactive.
To Next Page
Loading...
