Installation & Operation Manual 664 Document # LTRT-92224
Mediant 8000
5. Select a specific row in the Redirect Number Manipulation Tel to IP Table and in
the Configuration pane, click the corresponding link; the corresponding Redirect
Number Manipulation Tel to IP Settings screen is displayed.
6. Configure the Redirect Number Manipulation Tel to IP Table entry parameters
according to the table Redirect Number Manipulation Tel to IP Table Parameters'
below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
Table 41-8: Redirect Number Manipulation Tel to IP Table Parameter
Parameter Name Type
Provisioning
Type
Description
Destination
Prefix
String
Up to 101 chars.
Instant Destination Prefix
Redirect Prefix String
Up to 101 chars.
Instant Redirect Prefix
Source Trunk
Group ID
Integer
0-101
Instant Source Trunk Group ID
Source IP Group
ID
Integer
0-32
Instant Source IP Group ID
Number Type Enum
NotIncluded, Unknown,
InternationalLevel2Regional,
NationalLevel1Regional,
NetworkSpecificNetworkPIS
N,
SubscriberLevel0Regional,
Abbreviated, NotConfigured
Instant TON : Select the Number Type
assigned to this entry.
See ''Numbering Plans and Type
of Number' on page 666 for the
allowed combinations of Number
Plan and Number Type
parameters.
Number Plan Enum
NotIncluded, Unknown,
E164Public, Private,
NotConfigured
Instant NPI : Select the Number Plan
assigned to this entry.
Remove from
Left
Integer
0-211
Instant Stripped Digits From Left
Remove from
Right
Integer
0-211
Instant Stripped Digits From Right
Leave from Right Integer
0-255
Instant Number of Digits to Leave
Prefix2Add String
Up to 101 chars.
Instant Prefix to Add
Suffix2Add String
Up to 101 chars.
Instant Suffix to Add
To Next Page
Loading...
