AudioCodes Mediant 8000 - Table 49-1: SIP Logging Filter Properties

Version 6.6 849 October 2014
Installation & Operation Manual 49. Collecting Advanced Media Gateway Board Logs
7. Click the Maintenance icon , and then select Unlock to activate the
configuration.
Table
49-1: SIP Logging Filter Properties
Parameter Name Type
Provisioning
Type
Description
Filter Type Enum
Any
TrunkID
TrunkGroup
Bchannel
TeltoIP
IPtoTel
IP Group
SRD
Classification
IPtoIP routing
User
IP Trace
Instant Defines the filter criteria:
 Any (default)
 TrunkID = Filters according to a
specified Trunk ID (applicable only to
the Gateway application).
 Trunk Group ID = Filters according to a
specified Trunk Group ID (Applicable
only to the Gateway/IP-to-IP
application).
 B-channel = Filters according to a
specified Trunk and B-channel
(applicable only to the Gateway/IP-to-
IP application).
 Tel-to-IP = Filters according to a
specified Tel-to-IP routing rule listed in
the Outbound IP Routing table
(applicable only to the Gateway/IP-to-
IP application).
 IP-to-Tel = Filters according to a
specified IP-to-Tel routing rule listed in
the Inbound IP Routing table
(applicable only to the Gateway/IP-to-
IP application).
 IP Group = Filters according to a
specified IP Group ID listed in the IP
Group table.
 SRD = Filters according to a specified
SRD ID listed in the SRD table.
 Classification = Filters according to a
specified Classification rule listed in the
Classification table (applicable only to
the SBC and application).
 IP-to-IP Routing = Filters according to a
specified SBC IP-to-IP routing rule
listed in the IP-to-IP Routing table
(applicable only to the SBC
application).
 User = Filters according to a specified
user defined by username or
user@host.