Installation & Operation Manual 758 Document # LTRT-92224
Mediant 8000
43.12.2 SBC IP to IP Outbound Manipulation Table
The SBC IP to IP Outbound Manipulation table consists of the following two parts:
Matching Rules
Operation rules
All calls that match all or any combination of the "matching rules" are subsequently
modified according to the "operation rules".
To configure SBC IP to IP Outbound Manipulation:
1. Click the
button to access the Media Gateway status screen.
2. Select the SIP board.
3. In the Navigation pane, select SIP
SBC SBC Manipulation IP to IP
Outbound Manipulation; the SIP IP to IP Outbound Manipulation list is
displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and in the Configuration pane, click SBC IP to IP
Outbound Manipulation; the SBC IP to IP Outbound Manipulation screen is
displayed.
6. Configure SBC IP to IP Outbound Manipulation parameters according to the
tables 'SBC IP to IP Outbound Manipulation Table Matching Rules' and 'SBC IP
to IP Outbound Manipulation Table Operation Rules' below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
Table
43-11: SBC IP to IP Outbound Manipulation Table "Matching Rules"
Parameter Name Type
Provisioning
Type
Description
Source
Username Prefix
String
Up to 20 chars
Instant Defines the prefix of the user part of the
incoming SIP request's source URI
(usually the From header).
To denote any source username prefix
leave the field empty or use asterisk (*)
symbol.
Source Host String
Up to 50 chars
Instant Defines the hostname of the incoming SIP
request's source URI (usually the From
header).
To denote any source host leave the field
empty or use asterisk (*) symbol.
To Next Page
Loading...
