AudioCodes Mediant 8000 - Figure 37-5: Select Files Window

Installation & Operation Manual 434 Document # LTRT-92224
Mediant 8000
2. Select the raw Voice Prompt files (created in Step 1) step either by one of these
actions:
a. Click the Add Files button in the upper right corner. The Add Files window
appears. (See the figure, "Select Files Window" below.)
Navigate to the appropriate file.
Select it and click the Add>> button. To close the Add Files window, click
the
Exit button. (Press the Esc key to cancel changes.)
Figure
37-5: Select Files Window