AudioCodes Mediant 8000 - Table 36-1: Configuration-Backdoor Parameters

Installation & Operation Manual 418 Document # LTRT-92224
Mediant 8000
Table 36-1: Configuration-Backdoor Parameters
Parameter Name Type
Provisioning
Type
Description
Boards IDs String
Up to 40 chars.
Online Defines the Media Gateway boards to
which this backdoor parameter is applied.
Syntax:
 Number value 1 to 20 – the number of
board’s slot, e.g., "5" for slot 5.
 Multiple number values (delimited by
comma or space), e.g., "5,6,7" for slots
5, 6 and 7.
 Value range (delimited by dash),
e.g., "5-7" for slots 5, 6 and 7.
 Mix of value range and numbers,
e.g., "5,6-8,10" for slots 5, 5, 7, 8 and
10.
 Value "all" – to define the value for all
boards
Trunks IDs String
Up to 40 chars.
Online Defines Trunks to which this backdoor
parameter is applied.
Syntax:
 Number value 1 to 84 – the number of
trunk
 Multiple Number valuess (delimited by
comma or space), e.g., "4,5,6"
 Value range (delimited by dash),
e.g.,"4-5"
 Mix of value range and numbers,
e.g., "4,8-12,16"
 Value "all" – to define the value for all
trunks
 Value “none” – configuration applies to
the board itself and not to its trunks
Parameter name String
Up to 80 chars.
Online Defines the backdoor parameter name as
written in the ini file.
If the Trunk ID is specified (i.e., it is not
all/none) – a Trunk ID is appended to the
parameter name.