AudioCodes Mediant 8000 - Configuring V5.2 Links; Table 32-2: V5.2 Link Properties

Installation & Operation Manual 298 Document # LTRT-92224
Mediant 8000
32.1.2.4 Configuring V5.2 Links
Add new V5.2 Links voice and signaling links as required. Use Trunks and V5.2
Interfaces defined in the previous steps to complete the V5.2 Links configuration.
Ensure that for each V5.2 Interface, two signaling V5.2 Links – primary and secondary
– are defined.
 To configure V5.2 Links:
1. Click
to access the Media Gateway status screen.
2. Select the desired TP-8410 Media Gateway board.
3. In the Navigation pane, select PSTN
V5.2 V5.2 Links and in the
Configuration pane, click V5.2 Links; the V5.2 Links list is displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and in the Configuration pane,click V5.2 Link Settings; the
V5.2 Link Settings screen is displayed.
6. Configure V5.2 Link parameters as described in the table 'V5.2 Link Properties'
below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.
Table 32-2: V5.2 Link Properties
Parameter Name Type
Provisioning
Type
Description
V5.2 Link Name String
Up to 200
chars.
Instant User-defined name (Textual), for the V5.2
Link, enabling users to identify it intuitively
and easily.
Link ID Integer
0-127
Online Defines the V5.2 Link ID within the V5.2
Interface.
V5.2 Interface ID Integer
0-30
Online Defines the V5.2 Interface to which the V5.2
Link belongs.
Link Type Enum
Normal,
Primary,
Secondary
Online Defines the V5.2 Link Type.