AudioCodes Mediant 8000 - Configuring Telephone to Ip;Outbound Routing

Version 6.6 671 October 2014
Installation & Operation Manual 41. PSTN Gateway and IP-to-IP Applications
41.6.1.3 Configuring Telephone to IP/Outbound Routing
This section describes how to configure Telephone to IP/Outbound Routing.
 To configure Telephone to IP /Outbound Routing:
1. Click
to access the Media Gateway status screen.
2. Select the desired SIP board.
3. In the Navigation pane, select SIP
GW/IP to IP Routing Telephone to IP
/ Outbound; the Telephone to IP/Outbound Routing list is displayed.
4. Use the
or buttons to add or remove entries.
5. Select a specific row and then in the configuration pane, click SIP Routing Tel to
IP Settings; the SIP Routing Tel to IP Settings screen is displayed.
6. Configure Telephone to IP / Outbound Routing entry parameters according to the
tables below.
7. Click the Maintenance icon
and select Unlock to activate the configuration.