Installation & Operation Manual 164 Document # LTRT-92224
Mediant 8000
Note: These navigation tabs are used in the EMS GUI for navigation purposes only.
They are not represented in SNMP Alarm sources nor in the CLI management
interface.
To navigate between MOs, first select the MO name in the Navigation pane on the left,
and then select the MO instance in the corresponding status screen on the right (by
clicking on the corresponding drawing in graphical status screens or choosing the
table entry in table status screens). Whenever an MO instance is selected, the
Navigation pane and Info pane are updated accordingly. Repeat the process until the
desired MO instance is selected.
Figure
23-4: Navigation Pane and Info Panel in EMS
To Next Page
Loading...
