Version 6.6 455 October 2014
Installation & Operation Manual 37. Using Auxiliary Files
37.6.2 Converting External Coders File to Binary Format
After editing the "source" External Coders file, you must convert it to the binary format
using the DConvert utility provided on the Media Gateway Software Installation CD.
To convert a "source" External Coders file to a binary format:
1. Execute DConvert.exe and click the Process Coders Description button; the
Coders Window is displayed.
Figure
37-9: Coders Window
2. Click the Make File button. A Browse window appears.
3. Navigate to the desired location and select the file to be converted. (This
automatically designates the output file as the same name and path, but with the
.dat extension). The output file name may be altered.
4. Fill in the Description field. This step is optional. The maximum description
length is 64 chars.
5. Click the Make File button. The .dat file is generated and placed in the same
directory as shown in the Output File field. A message box informing you that the
operation was successful indicates that the process has been completed.
6. On the bottom of the Coders window, the Coders output log box displays the log
generated by the process. It may be copied as needed.
To Next Page
Loading...
