AudioCodes Mediant 8000 - Figure 43-5: SBC Application IP to IP Routing Types

Installation & Operation Manual 746 Document # LTRT-92224
Mediant 8000
For all destination types listed above, except destination IP Group, the IP Group can
optionally be, configured to provide the destination SRD and/or IP Profile. If neither the
destination SRD nor destination IP Group are defined, the destination SRD is the
source SRD and the destination IP Group is its default IP Group.
Figure
43-5: SBC Application IP to IP Routing Types
In addition to the alternative routing/load balancing provided by the Destination's IP
Group's associated Proxy Set, the SIP IP to IP Routing table also allows the
configuration of alternative routes, whereby if a route fails, the next adjacent rule in the
table that is configured as 'Alt Route Ignore/Consider Inputs' are used. The alternative
routes rules can be set to enforce the input matching criteria or to ignore any matching
criteria. For alternative routing, alternative SBC routing reasons (i.e., 4xx, 5xx, and 6xx
SIP responses) must be configured in the 'SBC Alternative Routing Reasons' table.
If no matching rule is located in the table, the call is rejected.