AudioCodes Mediant 8000 - Creating a Pre-Recorder Tones File

Version 6.6 431 October 2014
Installation & Operation Manual 37. Using Auxiliary Files
Notes:
• The maximum number of prerecorded tones that can be stored in one dat file is
40.
• The maximum PRT file size for TP-6310 board is 1 MB.
• If the same tone type is defined as PRT and CPT Tone, the tone is played
using the PRT module.
37.3.1 Creating a Pre-Recorder Tones File
Pre-recorded PCM (WAV) files must be converted to the binary format using the
DConvert utility provided on the Media Gateway Software Installation CD.
 To create Pre-Recorded Tones file:
1. Execute DConvert.exe and click the Process Prerecorded Tones file(s) button;
the Prerecorded Tones file(s) window is displayed.
2. Select the raw Prerecorded Tones files (created in Step 1) utilizing one of these
actions:
a. Click the Add Files button in the upper right corner; the Add Files window is
displayed.
Navigate to the appropriate file.
Select it and click the Add>> button. (To close the Add Files window, click
the
Exit button. Press the Esc key to cancel changes.) You are
returned to the Prerecorded Tones file(s) window.