Version 6.6 357 October 2014
Installation & Operation Manual 33. Configuring Security Settings
33.15 Network Services on the Mediant 8000
This chapter lists standard network services required for normal Mediant 8000
operation. Ensure that these services are allowed in the network to which the Mediant
8000 is connected and then configure external security equipment (e.g. Firewalls)
accordingly.
Table
33-14: Network Services
Service Name IP Address and Port Description
SSH Port 22
Global and private IP addresses of
SC boards.
Used for accessing Mediant 8000
Command Line Interface (CLI) and
transferring files to/from it.
SNMP Port 161
Global IP address of SC boards
Used for management and fault
monitoring tasks.
NTP Port 123 Private IP addresses of SC
boards.
Implements time and date
synchronization.
VoIP protocols
(SIP,
MGCPMEGAC
O, RTP etc)
IP addresses of Media Gateway
boards
Used for carrying signaling and voice
traffic.