AudioCodes Mediant 8000 - Page 356

Installation & Operation Manual 356 Document # LTRT-92224
Mediant 8000
Parameter Name Type Provisioning Type Description
End Port Integer
0-65535
Instant Defines the upper limit
of the IP packet's port
range. Default = 65535.
Protocol String Up to 10
chars.
Instant Defines the incoming
packet's IP protocol (as
encoded in the IP
header). Default value -
0 - implies any protocol.
Packet Size Integer
0-65535
Instant Defines the maximum
packet size of incoming
traffic. Default value - 0
- implies any size.
Byte Rate Integer
0-
2147483647
Instant Defines the maximum
byte rate of incoming
traffic. Default value - 0
- implies any rate.
Byte Burst Integer
0-
2147483647
Instant Defines the maximum
byte burst of incoming
traffic. Default value - 0
- implies any burst.
Action Enum
allow, block
Instant Action to be applied for
the packets that matchs
a specified rule -
allow/block.
Source Port Integer
0-65535
Instant Defines the source UDP
or TCP port (on the
remote host) from
where packets are sent
to the device.