Version 6.6 409 October 2014
Installation & Operation Manual 34. Performance Measurements
34.7 History Performance Measurements
History PMs are polled at much longer intervals than Real-Time PMs (15 minutes by
default). They are typically collected over long time periods. You may view and
analyze collected History PMs data.
Note: Before collecting History Performance measurements, you must define a PM
profile. For more information, see 'Performance Monitoring Profiles' on page 402.
To view collected History Performance Measurements:
1. Click
to access the Media Gateway status screen.
2. Select the relevant MO entity for which you wish to display Historical PMs. For
example, select the Media Gateway board, then in the Toolbar, click
Performance.
3. In the Performance pane, select History PM.
4. The "Select Screen" window is displayed.
Select the screen where you wish to display history performance measurements
data.
Figure
34-7: History PMs Select Screen
To Next Page
Loading...
