Installation & Operation Manual 240 Document # LTRT-92224
Mediant 8000
6. Open the iso2usb folder and run iso2usb.exe file by double-clicking on it.
Figure 27-3: ISO2USB
7. Click the “CD Disk” radio button and choose the drive letter that corresponds to
the CD/DVD drive where “Linux OS for SC Board” CD-ROM is inserted.
8. In the “USB Drive” combo box, choose the drive letter that corresponds to the
USB Flash Drive.
9. Press OK to create a bootable OS installation image on the USB Flash Drive.
10. Wait patiently while the image is created (it may take up to 15 minutes,
depending on the write speed of the USB Flash Drive that you use).
To Next Page
Loading...
