AudioCodes Mediant 8000 - Table 38-20: Media Gateway Boards MTP3;M3 UA Properties

Version 6.6 497 October 2014
Installation & Operation Manual 38. Configuring the PSTN Subsystem
Parameter Name Type Provisioning Type Description
Service Indicator2 Enum
none,0-15
Online Defines the 2
nd
filter Service Indicator.
MTP3 messages that match a specific
SI will be associated with this M3UA
Routing Context. The value 'none'
means that the filter is deactivated.
Service Indicator 3 Enum
none,0-15
Online Defines the 3
rd
filter Service Indicator.
MTP3 messages that match a specific
SI will be associated with this M3UA
Routing Context. The value 'none'
means that the filter is deactivated.
Service Indicator 4 Enum
none,0-15
Online Defines the 4
th
filter Service Indicator.
MTP3 messages that match a specific
SI will be associated with this M3UA
Routing Context. The value 'none'
means that the filter is deactivated.
Table 38-20: Media Gateway Board’s MTP3/M3UA Properties
Parameter Name Type
Provisioning
Type
Description
MTP3 Group Integer
0 – 15
Online Defines index of the SS7 MTP3 Group
that this Media Gateway board belongs
to. When set to 0 - no MTP3 application
is defined.
SS7 M3UA Traffic
Behavior
Enum
None,
Deactivate,
SIPO
Online Defines the M3UA behavior when the
SS7 links are up, but there is no
association to the soft switch.
none – no special behaviour
deactivate – deactivate (busy) links
SIPO – put links in Local Processor
Outage (LPO) state