AudioCodes Mediant 8000 - 34.5 Performance Monitoring Profiles

Installation & Operation Manual 402 Document # LTRT-92224
Mediant 8000
34.5 Performance Monitoring Profiles
This section describes how to configure Performance Monitoring Profiles for a Media
Gateway entity. The Profile includes a list of selected parameters arranged according
to the relevant configuration frame (see screen below). Once you have generated a
profile, you can attach it to the Gateway entity and activate polling. For example, you
can collect various statistics for the SC CPU, Memory and Disk utilization. When
polling is activated via this screen, only History statistics are collected.
 To generate Performance Monitoring Profiles:
1. Click
to access the Media Gateway status screen.
2. Select the relevant Media Gateway entity for which you wish to generate a PM
Profile. For example, select the Media Gateway board and in the toolbar, click
Performance.
3. In the Performance Pane, select PM Configuration; the MG Background
Monitoring screen is displayed.
Figure
34-1: MG Background Monitoring
Each parameter is measured using either Gauges or Counters. Gauges are
indicated by
and Counters are indicated by . For each PM query, if you
selected the Graph view then you cannot select parameters measured by both
Gauges and Counters.