AudioCodes Mediant 8000 - Converting cas File to Binary Format

Version 6.6 451 October 2014
Installation & Operation Manual 37. Using Auxiliary Files
• TRANSFER_CAPABILITY - The user is waiting for the reception of the
source transfer capability (line category).
37.5.1.6.8 Next State
The Next State column contains the next state the table moves to after executing the
function for that action/event line. When the user selects to stay in the same state,
insert NO_STATE or use the current state.
The difference between NO_STATE and the current state name in this field. If the user
selects to stay in the same current state, the unconditional actions (FUNCTION0) at
the beginning of the state are performed. In contrast, NO_STATE skips these
functions and waits for another action to come.
Reserved word "DO" must be written in the next state field if the unconditional actions
(FUNCTION0) at the beginning of the state are used.
37.5.2 Converting CAS File to Binary Format
After editing the "source" CAS file you must convert it to the binary format using the
DConvert utility provided on the Media Gateway Software Installation CD.
 To convert a "source" CAS file to a binary format:
1. Copy the "source" CAS files (both xxx.txt and xxx.h file) to the same directory in
which DConvert.exe is located and make sure that the two following files,
CASSetup.h and CPP.exe, are also located in this same directory.
2. Copy the files generated in the previous step (or at least the xxx.h file) to the
same directory in which DConvert.exe is located and make sure that the two
following files, CASSetup.h and CPP.exe, are also located in this same
directory.