Installation & Operation Manual 160 Document # LTRT-92224
Mediant 8000
For detailed information on using the EMS see the following documents:
EMS User’s Manual, Document # LTRT 910xx
EMS Release Notes - Document # LTRT-912xx
Mediant 5000 and Mediant 8000 Alarm and Performance Monitoring Guide -
Document # LTRT-237xxx
23.3 SNMP Management Interface
The SNMP management interface is used by the EMS server and/or standards-
compliant 3
rd
party SNMP managers to perform most of the Mediant 8000
management, configuration and status monitoring tasks. For detailed information, see
'SNMP Management Interface' on page 170.
23.4 CLI Management Interface
In addition, a CLI (command line) interface may be used for management,
configuration and status monitoring. For detailed information, see:
CLI Reference - Document # LTRT-892xx
23.5 Syslog Management Interface
In addition, a Syslog management interface may be used to perform status monitoring.
For detailed information, see 'Syslog Management Interface' on page 175.
23.6 Managed Objects, Administrative and Operational
State
The operational configuration and status of the Mediant 8000 Media Gateway uses an
ITU-T X.730/731 compatible data model.
The operational configuration and status of the Mediant 8000 Media Gateway is
represented by a set of Managed Objects (MOs), which combine physical and logical
resources. Each MO contains multiple attributes that represent different properties of
specific resource. Each attribute has access permissions (read-write or read-only)
that indicate whether specific property may or may not be modified by the user.
Examples of MOs that represent physical resources are: Media Gateway, Media
Gateway Board, and E1/T1 Trunk.
Examples of MOs that represent logical resources are: SS7 Node, Firewall Profile,
and Media Gateway Controller (Call Agent).
To Next Page
Loading...
