Version 6.6 345 October 2014
Installation & Operation Manual 33. Configuring Security Settings
Table 33-8: SC IKE Proposal Parameters
Parameter Name Type
Provisioning
Type
Description
Authentication Enum
MD5, SHA1,
SHA256,
SHA384,
SHA512
Online Defines the authentication algorithm for
IPSEC and IKE SAs.
SHA256, SHA384 and SHA512
authentication algorithms are supported on
SC Rev.2 (Linux OS based) boards only.
Encryption Enum
DES, 3DES, AES
Online Defines the encryption algorithm for IPSEC
and IKE SAs.
AES encryption algorithm is supported on
SC Rev.2 (Linux OS based) boards only.
DH Group Enum
ModP768(1),
ModP1024(2),
ModP1536(5),
ModP2048(14),
ModP3072(15),
ModP4096(16),
ModP6144(17),
ModP8192(18)
Online Defines Diffie Hellman group.
Only ModP768(1) and ModP1024(2) DH
groups are supported on SC Rev.1 (Solaris
OS based) boards.
To activate the new configuration:
1. Select the SC IPSEC Rule that you configured above.
2. In the Actions bar, click Unlock
To Next Page
Loading...
