Version 6.6 75 October 2014
Installation & Operation Manual 13. Ethernet Switch Board
13.1.2 ES/6600 LEDs
The ES/6600 Ethernet Switch board has LED indicators on its front panel that are
used to indicate the status of the board and its Ethernet Ports.
Table
13-1: ES/6600 Board Status Led Indicators
LED Description Color Code Remarks
SYSTEM Indicates board operation
status
Green Normal operation
Yellow Board is rebooting
Off Power is not available
FAULT Indicates the fault condition
on the board
Off Normal state
Red Fault condition is detected
Port Activity Indicates the activity status for
each of the 24 available
Ethernet Ports. See ES/6600
Physical Slots to Ethernet
Port Mapping below to
determine where the specific
Ethernet Port is connected.
Green Port is connected
Off Port is disconnected
Flashing Green Activity on port (transmit or
receive)
Port Speed Indicates speed for each of
the 24 available Ethernet
Ports.
Yellow Port operates at 1000 Mbps
speed
Off Port operates at 10 or 100
Mbps speed
HOT SWAP Indicates board readiness for
extraction from the chassis
Off Normal state
Blue Board is ready for extraction
(latches are open)
To Next Page
Loading...
